Premium
WEATHER DEFENSE
Technical Information
| COVERAGE | 13-15 m / liter / coat |
| APPLICATION | Brush / Roller / Spray Gun |
| THINNER | Clean Water |
| DRYING TIME | 2-3 hours between coats |
| NO OF COATS | 3-4 |
| THINNING | By Roller / Brush 50-75% By Spray 25% |
| CLEANING | Clean all equipment with water |
How to Apply
1. SURFACE PREPARATION
Surfaces must be clean, dry and free from all surface contamination. Treat mould with bleach then rinse with fresh water. After priming with Wallman Primer, fill and smooth the surface with Wallman WallPutty.
2. REPAINT
Remove all loose and flaking paint. Spot bare areas with Wallmanprimer.
3. STIRRING
Stir paint with a wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is a requirement to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint. Continue stirring at regular intervals during application. Where more than one can of the same colour and product is required for a job, mix the contents of all the cans together to ensure colour consistency.
4. AFTER PAINTING
Avoid exposure to steam for 48 hours. Surface may be washed after 7 days, but always avoid abrasive cleaners.
5. CLEAN UP
Water: Scrape excess paint from equipment into a separate container. Wash up with water. Do not dispose of paint or wash water into drains or sewers.
Typical Surfaces
- New surfaces.
- Previously painted surfaces.
- Powdery dusty surfaces.
- (With cracks and other surface defects)
Finish
- FLAT
- LOW SHEEN
- HIGH SHEEN
- SEMI GLOSS
- SMOOTH
